NSN LB-020

Two or more individual fixed, variable, thermal, or adjustable resistors on a common mounting or mounted on each other. The resistors must be separable and each must be capable of functioning in accordance with its applicable item name. For variable resistors mounted in tandem with a common or dual concentric shaft, see resistor, variable (as modified) and attenuator, variable. For inseparable resistors permanently cased, sealed or potted together to form a multisection unit, see resistor assortment; resistor set, matched; and items which have wire leads temporarily twisted together, or are otherwise physically attached solely for convenience in handling or shipping.

hermetically sealed inclosure type, 0.500 inches maximum body outside diameter, frequency rating, 0.500 inches maximum body length, unable to decode impedance rating in ohms.

NSN 5950-00-759-9731 Datasheet

(NSN) National Stock Number

5950-00-759-9731

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-759-9731

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Fri, Jan 1, 1960

Schedule B Code

8548900100

Body Length

0.500 inches maximum

Body Outside Diameter

0.500 inches maximum

Frequency Rating

Impedance Rating In Ohms

unable to decode

Inclosure Type

hermetically sealed

Maximum Transformer Power Rating

unable to decode

Mounting Method

unable to decode

Primary To Secondary Turn Ratio

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

5 wire lead

Winding Function And Quantity

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

65597

"thales Usa, Inc. Div Air Mobility Solutions ("ams")"

U.s./canadian manufacturers

62228

Meggitt Defense Systems, Inc. Dba Meggitt Defense Systems Inc

U.s./canadian manufacturers

07388

Torotel, Inc. Div Torotel Products, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-759-9731?

   The FSCG of the NSN 5950-00-759-9731 is 5950

2. Does the NSN 5950-00-759-9731 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-759-9731 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-759-9731 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-759-9731 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-759-9731 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960