NSN LB622

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

2.0 attenuation per step in decibels, audio application design, stepped attenuation variation method, 1.750 inches nominal body diameter, 1 shaft adjustment device type and quantity.

NSN 5985-00-666-0715 Datasheet

(NSN) National Stock Number

5985-00-666-0715

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-666-0715

Requires Demilitarization

Yes

(INC) Item Name Code

00838

Date

Tue, Jan 1, 1963

Schedule B Code

8529109000

Adjustment Device Type And Quantity

1 shaft

Application Design

audio

Attenuation Per Step In Decibels

2.0

Attenuation Variation Method

stepped

Body Diameter

1.750 inches nominal

Body Length

2.062 inches nominal

Body Style

cylindrical w/side terminals

Distance Between Mounting Facility Centers

1.375 inches nominal

Frequency Range

0.000 kilohertz minimum and 20.000 kilohertz maximum

Impedance Rating In Ohms

500.0 input-output

Mounting Facility Nominal Screw Thread Diameter

0.138 inches

Mounting Facility Pattern

two position in-line

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

2 threaded hole(s)

Mounting Thread Quantity

32 per inch

Overall Attenuation Accuracy In Decibels

-2.00 to 2.00

Overall Attenuation Range In Decibels

+0.0 to 40.0

Overall Length

3.000 inches nominal

Overall Width

1.969 inches nominal

Schematic Diagram Designator

unbalanced ladder

Shaft Diameter

0.250 inches nominal

Shaft Type

round

Shaft Length

0.938 inches nominal

Step Position Quantity

20

Terminal Type And Quantity

3 tab, solder lug

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000838

Cross Reference

CAGE Codes

52263

Multi-Tech Industries Inc.

U.s./canadian manufacturers

83332

Tech Logistics, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-00-666-0715?

   The FSCG of the NSN 5985-00-666-0715 is 5985

2. Does the NSN 5985-00-666-0715 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-00-666-0715 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5985-00-666-0715 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5985-00-666-0715 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-666-0715 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963