NSN LC601

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.385 inches maximum body outside diameter, 0.370 inches maximum body length, 1000.0 average life rating in hours, unable to decode functional terminal type and quantity, encased inclosure type.

NSN 5915-01-070-3570 Datasheet

(NSN) National Stock Number

5915-01-070-3570

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-070-3570

Requires Demilitarization

Yes

(INC) Item Name Code

00765

Date

Wed, Jan 10, 1979

Schedule B Code

8527995030

Average Life Rating In Hours

1000.0

Body Length

0.370 inches maximum

Body Outside Diameter

0.385 inches maximum

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Load Impedance Per Function

50.0 ohms blank

Maximum Dielectric Withstanding Dc Voltage

100.0 volts at sea level

Maximum Temp Rise

7.0 celsius

Maximum Voltage Drop Per Function

800.0 millivolts dc blank

Mounting Facility Screw Thread Series Designator

unf

Mounting Facility Type And Quantity

1 threaded bushing

Nominal Thread Size

0.250 inches

Operating Current Rating Per Function In Amps

10.0 blank

Operating Voltage Rating And Type Per Function

50.0 volts dc blank

Operating Temp Range

-55.0 to 125.0 celsius

Overall Length

0.910 inches maximum

Principal Circuitry Type Per Function

inductance-capacitance blank

Source Impedance Rating Per Function

50.0 ohms blank

Specification/Standard Data

81349-mil-f-15733/58 government specification

Style Designator

round terminal/terminals on opposite surfaces

Test Data Document

"81349-mil-f-15733 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Vibration Resistance Range In Hertz

+10.0 to 2000.0

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000765

Cross Reference

CAGE Codes

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

12294

Murata Erie North America Inc Divof Murata Erie

U.s./canadian manufacturers

11447

L3 Technologies, Inc. Div Communication Systems-East

U.s./canadian manufacturers

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

18796

Murata Erie North America Inc State College Opns

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

14158

Avx Filters

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-070-3570?

   The FSCG of the NSN 5915-01-070-3570 is 5915

2. Does the NSN 5915-01-070-3570 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-070-3570 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5915-01-070-3570 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-01-070-3570 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-070-3570 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Wed, Jan 10, 1979