NSN LF-582A-1

A nut, circular in shape, which may have wrenching facilities such as flats, holes, protrusions, slots or splines in or on the periphery or in the face opposite the bearing surface. For items having a thickness (or height) exceeding two times the outside diameter, use post, electrical-mechanical equipment. See also nut (1), plain, knurled. (when height or thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

2.750 inches nominal flange diameter, 0.060 inches nominal flange thickness, 1.620 inches minimum and 1.625 inches maximum body outside diameter, 1.500 inches minimum and 1.505 inches maximum body inside diameter, not casehardened casehardening indicator.

NSN 5340-01-044-5435 Datasheet

(NSN) National Stock Number

5340-01-044-5435

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-044-5435

Requires Demilitarization

Yes

(INC) Item Name Code

24327

Date

Fri, Jul 15, 1977

Schedule B Code

7320905060

Body Inside Diameter

1.500 inches minimum and 1.505 inches maximum

Body Outside Diameter

1.620 inches minimum and 1.625 inches maximum

Casehardening Indicator

not casehardened

Flange Diameter

2.750 inches nominal

Flange Thickness

0.060 inches nominal

Material Document And Classification

astm a365 assn std single material response

Material

steel

Outside Chamfer Angle In Deg

45.0

Overall Height

0.560 inches nominal

Style Designator

parallel

Surface Treatment

cadmium

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0024327

Cross Reference

CAGE Codes

08832

Schroeder Industries Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

7320-90-5060

Description

springs of iron or steel, other than of wire nesoi

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69940

(NAICS) North American Industrial Classification System

332613

Questions & Answers

1. What is the FSCG of the NSN 5340-01-044-5435?

   The FSCG of the NSN 5340-01-044-5435 is 5340

2. Does the NSN 5340-01-044-5435 have a Schedule B code assigned?

   Yes, the Schedule B code is 7320905060

3. Does NSN 5340-01-044-5435 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-044-5435 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-01-044-5435 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-044-5435 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Fri, Jul 15, 1977