NSN LL44B

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

line cover mounting hole arrangement style, 1.250 inches all entrance conduit trade size accommodated, hub drilled and tapped all entrance conduit entrance type, rigid metallic thickwall all entrance conduit type accommodated, threaded fastener cover mounting method.

NSN 5975-01-041-3400 Datasheet

(NSN) National Stock Number

5975-01-041-3400

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-041-3400

Requires Demilitarization

Yes

(INC) Item Name Code

06945

Date

Mon, May 23, 1977

Schedule B Code

8543909000

Conduit Entrance Type

hub drilled and tapped all entrance

Conduit Trade Size Accommodated

1.250 inches all entrance

Conduit Type Accommodated

rigid metallic thickwall all entrance

Cover Mounting Hole Arrangement Style

line

Cover Mounting Method

threaded fastener

Cover Mounting Surface Type

flat

Cover Mounting Hole Quantity

2

Cover Opening Length

5.312 inches nominal

Cover Opening Width

1.750 inches nominal

Hazardous Locations/Environmental Protection

not rated

Material

iron malleable overall

Overall Depth

2.375 inches nominal

Overall Length

7.531 inches nominal

Overall Width

3.156 inches nominal

Style Designator

oblong

Surface Treatment

cadmium and zinc overall

Trade Designation

ll series form 8

Wiring Device Gang Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006945

Cross Reference

CAGE Codes

15235

Crouse-Hinds Co

U.s./canadian manufacturers

77774

Crouse-Hinds Lighting

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-01-041-3400?

   The FSCG of the NSN 5975-01-041-3400 is 5975

2. Does the NSN 5975-01-041-3400 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-01-041-3400 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-01-041-3400 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-01-041-3400 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-01-041-3400 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Mon, May 23, 1977