NSN LLH373383

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

pipe drain fixer pr part name assigned by controlling agency.

NSN 6525-01-421-5423 Datasheet

(NSN) National Stock Number

6525-01-421-5423

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6525 - Veterinary Dental Imaging Equipment and Supplies: Medical

(NIIN) National Item Identification Number

01-421-5423

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Thu, Nov 9, 1995

Part Name Assigned By Controlling Agency

pipe drain fixer pr

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1766340

Cross Reference

CAGE Codes

4S405

Konica Minolta Healthcare Americas Inc

Non-manufacturers

66736

Naval Medical Material Support Command Detachment

U.s./canadian manufacturers

89875

Defense Logistics Agency Directorate of Medical Materiel Defense Supply Center Philadelphia

U.s./canadian manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

98185

Water Commodity

651 - Instruments, medical and surgical

National Motor Freight Classification Item Number

063560

Questions & Answers

1. What is the FSCG of the NSN 6525-01-421-5423?

   The FSCG of the NSN 6525-01-421-5423 is 6525

2. Does NSN 6525-01-421-5423 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6525-01-421-5423 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6525-01-421-5423 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6525-01-421-5423 was assigned to the Federal Catalog?

   It was assigned 30 years ago, on Thu, Nov 9, 1995