NSN LO1306

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

unable to decode material, 0.250 inches nominal outside corner radius, zzzy criticality code justification, 20.530 inches nominal aperture length, 0.250 inches nominal cross-sectional thickness.

NSN 5330-01-359-4405 Datasheet

(NSN) National Stock Number

5330-01-359-4405

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-359-4405

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Fri, Jun 5, 1992

Schedule B Code

4016930000

Aperture Length

20.530 inches nominal

Criticality Code Justification

zzzy

Cross-Sectional Thickness

0.250 inches nominal

Material

unable to decode

Outside Corner Radius

0.250 inches nominal

Overall Length

22.280 inches nominal

Overall Width

1.500 inches nominal

Reference Number Differentiating Characteristics

as differentiated by material which must conform to ships parts control center special quality control provisions

Special Test Features

special quality control testing

Test Data Document

"81349-mil-p-23199 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

94271

Lockheed Martin Corp

U.s./canadian manufacturers

14153

Defense Logistics Agency Dba Defense Supply Center Philadelphia

Non-manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

4016-93-0000

Description

gaskets, washers and other seals, of vulcanized rubber other than hard rubber

End Use

12750 - Industrial rubber products

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

62999

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-01-359-4405?

   The FSCG of the NSN 5330-01-359-4405 is 5330

2. Does the NSN 5330-01-359-4405 have a Schedule B code assigned?

   Yes, the Schedule B code is 4016930000

3. Does NSN 5330-01-359-4405 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-01-359-4405 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5330-01-359-4405 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-01-359-4405 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Fri, Jun 5, 1992