NSN LO2217

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.295 inches nominal body length, 0.320 inches nominal body width, 125.0 celsius ambient temp at full rated power, 0.100 inches nominal body height, 175.0 ambient temp in deg celsius at zero percent rated power.

NSN 5905-01-026-5075 Datasheet

(NSN) National Stock Number

5905-01-026-5075

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

01-026-5075

Requires Demilitarization

Yes

(INC) Item Name Code

05311

Date

Fri, Aug 27, 1976

Schedule B Code

8533100042

Ambient Temp At Full Rated Power

125.0 celsius

Ambient Temp In Deg Celsius At Zero Percent Rated Power

175.0

Body Height

0.100 inches nominal

Body Length

0.295 inches nominal

Body Width

0.320 inches nominal

Electrical Resistance

820.000 ohms

Inclosure Type

encapsulated

Power Dissipation Rating In Watts

0.300 free air

Reliability Indicator

not established

Resistance Tolerance In Percent

-1.000 to 1.000

Special Features

item must comply with requirements of defense supply center columbus production standard no. lo2217. navicp activity hx quality control manufacturingand testing specifications no longer apply to this material

Style Designator

terminals one edge

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-5.0 to 5.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 125.0

Terminal Length

1.500 inches minimum

Terminal Type

wire lead

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0005311

Cross Reference

CAGE Codes

94271

Lockheed Martin Corp

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

18612

Vishay Intertechnology, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-10-0042

Description

fixed carbon resistors, composition or film type, designed for surface mounting, having two terminals

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77231

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-01-026-5075?

   The FSCG of the NSN 5905-01-026-5075 is 5905

2. Does the NSN 5905-01-026-5075 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533100042

3. Does NSN 5905-01-026-5075 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-01-026-5075 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5905-01-026-5075 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-01-026-5075 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Fri, Aug 27, 1976