NSN LO2932

An open coiled spring, wound in various forms and from different shapes and types of materials and finished at the ends, designed to provide resistance to compression forces. Excludes:springs designed for thermal actuation (springs in which the torsion forces are designed to be counteracted by changes in temperature) and spring, reinforcing, hose.

20.0 milliamperes resistive load ac at altitude contact load current rating, 250.0 milliamperes resistive load and 100.0 milliamperes inductive load dc at sea level contact load current rating, 200.0 milliamperes resistive load and 25.0 milliamperes inductive load dc at altitude contact load current rating, cabinet 94271 end item identification, 75.0 milliamperes resistive load ac at sea level contact load current rating.

NSN 5930-01-099-1024 Datasheet

(NSN) National Stock Number

5930-01-099-1024

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-099-1024

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, Aug 13, 1980

Schedule B Code

8536509020

End Item Identification

cabinet 94271

Contact Load Current Rating

75.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

20.0 milliamperes resistive load ac at altitude

Contact Load Current Rating

200.0 milliamperes resistive load and 25.0 milliamperes inductive load dc at altitude

Contact Load Current Rating

250.0 milliamperes resistive load and 100.0 milliamperes inductive load dc at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

115.0 ac at altitude

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at altitude

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.250 inches nominal single actuator

Flat Height

0.216 inches nominal single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

2

Mounting Method

threaded bushing with panel seal single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Type

slotted bushing at 3:00 oclock

Operating Temp Range

-65.0 to 125.0 celsius

Overall Diameter

1.000 inches minimum and 1.306 inches maximum

Overall Length

2.245 inches nominal

Pole Quantity

3 each section front

Rotor Through Connection Quantity

3 each section

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

195.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.437 inches nominal single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

4 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.437 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

4 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

94271

Lockheed Martin Corp

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-099-1024?

   The FSCG of the NSN 5930-01-099-1024 is 5930

2. Does the NSN 5930-01-099-1024 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-099-1024 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-099-1024 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-099-1024 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-099-1024 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Wed, Aug 13, 1980