NSN LP155D

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2.520 inches minimum and 2.580 inches maximum body height, 1.560 inches minimum and 1.620 inches maximum body width, 1.560 inches minimum and 1.620 inches maximum body length, 1.150 inches minimum and 1.210 inches maximum distance between centerlines of mounting facilities parallel to body length, 1.150 inches minimum and 1.210 inches maximum distance between centerlines of mounting facilities parallel to body width.

NSN 5915-00-717-5142 Datasheet

(NSN) National Stock Number

5915-00-717-5142

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-717-5142

Requires Demilitarization

Yes

(INC) Item Name Code

13911

Date

Tue, Jan 1, 1963

Schedule B Code

8527995030

Body Height

2.520 inches minimum and 2.580 inches maximum

Body Length

1.560 inches minimum and 1.620 inches maximum

Body Width

1.560 inches minimum and 1.620 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

1.150 inches minimum and 1.210 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.150 inches minimum and 1.210 inches maximum

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

1 threaded stud(s)

Nominal Thread Size

0.138 inches

Operating Temp Range

-30.0 to 55.0 celsius

Overall Height

3.332 inches minimum and 3.518 inches maximum

Style Designator

rectangular terminal/terminals on one surface

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0013911

Cross Reference

CAGE Codes

59364

Honeywell International Inc. Dba Honeywell International Div Aerospace - Tempe (west Warner Road)

U.s./canadian manufacturers

77068

Allied-Signal Inc Dba Allied-Signal Aerospace Co Electrodynamics Div

U.s./canadian manufacturers

02112

California Magnetic Control Corp

U.s./canadian manufacturers

12187

Datafilters Inc

U.s./canadian manufacturers

80294

Bourns Instruments Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

21275

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

069100

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-717-5142?

   The FSCG of the NSN 5915-00-717-5142 is 5915

2. Does the NSN 5915-00-717-5142 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-717-5142 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-00-717-5142 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-717-5142 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-717-5142 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963