NSN LS12982

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

cold rolled fabrication method, angle basic shape style, square end first tip style, 0.040 inches nominal base flange thickness, 0.060 inches nominal fillet radius where left flange joins base flange.

NSN 9540-01-395-9596 Datasheet

(NSN) National Stock Number

9540-01-395-9596

(FSG) Federal Supply Group

95 - Metal Bars, Sheets, and Shapes

(FSC) Federal Supply Classification

9540 - Nonferrous Base Metal Structural Shapes

(NIIN) National Item Identification Number

01-395-9596

Requires Demilitarization

Yes

(INC) Item Name Code

37017

Date

Fri, Sep 9, 1994

Basic Shape Style

angle

Base Flange Thickness

0.040 inches nominal

Fabrication Method

cold rolled

Fillet Radius Where Left Flange Joins Base Flange

0.060 inches nominal

First Tip Style

square end

Heat Treatment

t-4 solution heat treated

Left Inside Angle

90.0 degrees nominal

Left Side Flange Thickness

0.040 inches nominal

Length

10.000 feet minimum and 12.000 feet maximum

Material Document And Classification

qq-a-200/3 fed spec 1st material response

Material

aluminum alloy 2024

Overall Height

0.440 inches nominal

Overall Width

1.125 inches nominal

Second Tip Relationship To First Tip

identical

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0037017

Cross Reference

CAGE Codes

29321

Transtar Metals Corp

U.s./canadian manufacturers

98897

Lockheed Martin Corp Dba Lockheed Martin Aerostructures Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

53630

Water Commodity

576 - Metal and metal products, nos, (less than 35 feet)

National Motor Freight Classification Item Number

104050

Questions & Answers

1. What is the FSCG of the NSN 9540-01-395-9596?

   The FSCG of the NSN 9540-01-395-9596 is 9540

2. Does NSN 9540-01-395-9596 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 9540-01-395-9596 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 9540-01-395-9596 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 9540-01-395-9596 was assigned to the Federal Catalog?

   It was assigned 32 years ago, on Fri, Sep 9, 1994