NSN LS5911BTH24D

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

1 end clip quantity, end clip and metallic grommet fastener type, end clip end clip style designator, olive drab color, both w/attachments end type.

NSN 5340-00-123-3428 Datasheet

(NSN) National Stock Number

5340-00-123-3428

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-123-3428

Requires Demilitarization

Yes

(INC) Item Name Code

20659

Date

Fri, Nov 1, 1968

Color

olive drab

End Clip Quantity

1

End Clip Style Designator

end clip

End Type

both w/attachments

Fastener Type

end clip and metallic grommet

Grommet Barrel Style Designator

straight round type

Grommet Quantity

1

Length

24.000 inches nominal

Material

cotton location not otherwise specified

Material

steel end clip

End Clip Material

unable to decode

Width

1.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020659

Cross Reference

CAGE Codes

98897

Lockheed Martin Corp Dba Lockheed Martin Aerostructures Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-123-3428?

   The FSCG of the NSN 5340-00-123-3428 is 5340

2. Does NSN 5340-00-123-3428 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-123-3428 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-123-3428 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-123-3428 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Fri, Nov 1, 1968