NSN LTCEF100GY

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

1.000 inches nominal inside diameter, 1.250 inches nominal outside diameter, unable to decode material, contractor logistic support, model m871, 30-foot trailer, laundry advanced system (ladds), nsn 2330-00-122-6779, contract daak60-97-c-9222, tm 9-3510-122-24p end item identification, 600.000 inches nominal length.

NSN 5975-01-481-5205 Datasheet

(NSN) National Stock Number

5975-01-481-5205

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-481-5205

Requires Demilitarization

Yes

(INC) Item Name Code

29529

Date

Thu, Jan 11, 2001

Schedule B Code

8543909000

End Item Identification

contractor logistic support, model m871, 30-foot trailer, laundry advanced system (ladds), nsn 2330-00-122-6779, contract daak60-97-c-9222, tm 9-3510-122-24p

Inside Diameter

1.000 inches nominal

Length

600.000 inches nominal

Material

unable to decode

Outside Diameter

1.250 inches nominal

Style Designator

plain conduit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0029529

Cross Reference

CAGE Codes

4X630

Guild Associates Inc

U.s./canadian manufacturers

09641

Electri-Flex Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

29370

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

050925

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-01-481-5205?

   The FSCG of the NSN 5975-01-481-5205 is 5975

2. Does the NSN 5975-01-481-5205 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-01-481-5205 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-01-481-5205 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-01-481-5205 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-01-481-5205 was assigned to the Federal Catalog?

   It was assigned 25 years ago, on Thu, Jan 11, 2001