NSN M110PLR1

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2530-01-574-7930, steering gear.

NSN 2530-01-574-7930 Datasheet

(NSN) National Stock Number

2530-01-574-7930

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

01-574-7930

Requires Demilitarization

Yes

(INC) Item Name Code

19540

Date

Wed, Jun 10, 2009

Schedule B Code

8708945000

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0019540

Cross Reference

CAGE Codes

45152

Oshkosh Corp

U.s./canadian manufacturers

75Q65

Oshkosh Defense Llc

U.s./canadian manufacturers

78222

R. H. Sheppard Co., Inc. Dba Sheppard

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

09090

Water Commodity

585 - Vehicles and auto supplies

National Motor Freight Classification Item Number

019660

Schedule B & Trade

Schedule B

8708-94-5000

Description

steering wheels, steering columns and steering boxes for vehicles, nesoi

End Use

30230 - Other parts and accessories of vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

78439

(NAICS) North American Industrial Classification System

336330

Questions & Answers

1. What is the FSCG of the NSN 2530-01-574-7930?

   The FSCG of the NSN 2530-01-574-7930 is 2530

2. Does the NSN 2530-01-574-7930 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708945000

3. Does NSN 2530-01-574-7930 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2530-01-574-7930 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2530-01-574-7930 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2530-01-574-7930 was assigned to the Federal Catalog?

   It was assigned 17 years ago, on Wed, Jun 10, 2009