NSN M12007

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.807 inches nominal overall length, 1.479 inches nominal overall width, isolation transformer: turns ratio 1.41 to 1.0; 4 resistors; insulation resistance 1000 megaohms; input risetime/fall time: 100 nanoseconds special features, +0.0 to 1.0 megahertz frequency range, 1.216 inches nominal overall height.

NSN 6625-01-311-5145 Datasheet

(NSN) National Stock Number

6625-01-311-5145

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-311-5145

Requires Demilitarization

Yes

(INC) Item Name Code

06159

Date

Wed, Nov 29, 1989

Schedule B Code

8536908085

Frequency Range

+0.0 to 1.0 megahertz

Overall Height

1.216 inches nominal

Overall Length

1.807 inches nominal

Overall Width

1.479 inches nominal

Special Features

isolation transformer: turns ratio 1.41 to 1.0; 4 resistors; insulation resistance 1000 megaohms; input risetime/fall time: 100 nanoseconds

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006159

Cross Reference

CAGE Codes

03640

Lockheed Martin Corporation Div Rotary and Mission Systems

U.s./canadian manufacturers

08715

Cen Electronics a Div of Chloride Power Electronics Inc

U.s./canadian manufacturers

1BX22

Exxelia Usa, Inc.

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

M - 85.0

National Motor Freight Class Rating

W - Rating variable

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8536-90-8085

Description

electrical apparatus for switching or protecting electrical circuits, or for making connection to/ in electrical circuits,for a voltage lt=1000v,nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77259

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 6625-01-311-5145?

   The FSCG of the NSN 6625-01-311-5145 is 6625

2. Does the NSN 6625-01-311-5145 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536908085

3. Does NSN 6625-01-311-5145 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 6625-01-311-5145 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-311-5145 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-311-5145 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Wed, Nov 29, 1989