NSN M21-24

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

unable to decode conduit type accommodated, unable to decode item accommodated trade size, unable to decode end type, cement tight hazardous locations/environmental protection, steel material.

NSN 5975-00-446-7782 Datasheet

(NSN) National Stock Number

5975-00-446-7782

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

00-446-7782

Requires Demilitarization

Yes

(INC) Item Name Code

09664

Date

Fri, Jan 12, 1968

Schedule B Code

8543909000

Conduit Type Accommodated

unable to decode

End Type

unable to decode

Hazardous Locations/Environmental Protection

cement tight

Item Accommodated Trade Size

unable to decode

Material

steel

Overall Length

3.375 inches nominal

Style Designator

set screw

Surface Treatment

zinc

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0009664

Cross Reference

CAGE Codes

33342

Atlas Technologies Inc

U.s./canadian manufacturers

83879

Egs Electric Co Llc

U.s./canadian manufacturers

03743

Egs Electrical Group Appleton Div

U.s./canadian manufacturers

56501

Abb Installation Products Inc

U.s./canadian manufacturers

78229

Thomas and Betts Corp American Electric Div Oem Group Memphis Tn

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34460

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061520

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-00-446-7782?

   The FSCG of the NSN 5975-00-446-7782 is 5975

2. Does the NSN 5975-00-446-7782 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-00-446-7782 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-00-446-7782 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-00-446-7782 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-00-446-7782 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, Jan 12, 1968