NSN M24236/1-EJCGD

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

0.260 inches minimum and 0.325 inches maximum body height, actuation point not adjustable and deactuation point not adjustable contact adjustability, 0.640 inches maximum body diameter, increase contact action stimulus, contact load current rating.

NSN 5930-01-309-8052 Datasheet

(NSN) National Stock Number

5930-01-309-8052

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-309-8052

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Tue, Oct 24, 1989

Schedule B Code

9032100000

Body Diameter

0.640 inches maximum

Body Height

0.260 inches minimum and 0.325 inches maximum

Contact Action Stimulus

increase

Contact Adjustability

actuation point not adjustable and deactuation point not adjustable

Contact Load Current Rating

Contact Stimulus Rating

125.00 actuation point nominal degrees fahrenheit and 80.00 deactuation point nominal degrees fahrenheit

Contact Voltage Rating In Volts

unable to decode

Distance Between Mounting Facility Centers

0.930 inches minimum and 0.944 inches maximum

Features Provided

hermetically sealed case

Frequency In Hertz

unable to decode

Hazardous Locations/Environmental Protection

vibration resistant

Media For Which Designed

gas or liquid

Mounting Facility Pattern

two position in-line

Mounting Method

bracket(s) and slot and unthreaded hole(s)

Mounting Slot Width

0.133 inches minimum and 0.147 inches maximum

Nonpile-Up Contact Arrangement

1 pole, single throw, normally closed, momentary action

Operating Temp Rating

-65.0 fahrenheit minimum and 500.0 fahrenheit maximum

Overall Height

0.453 inches minimum and 0.683 inches maximum

Overall Length

1.160 inches minimum and 1.260 inches maximum

Specification/Standard Data

81349-mil-s-24236/1 government specification

Style Designator

disc w/flange

Temp Sensing Element Type

internal sensor

Terminal Type

tab, solder lug

Test Data Document

"81349-mil-s-24236 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.133 inches minimum and 0.147 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-01-309-8052?

   The FSCG of the NSN 5930-01-309-8052 is 5930

2. Does the NSN 5930-01-309-8052 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-01-309-8052 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-309-8052 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-309-8052 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-309-8052 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Tue, Oct 24, 1989