NSN M3786/28-GFD

A microcircuit whose output is a function of the input; that is, the output varies in a predetermined and essentially predictable manner from the input signal.

explosion proof hazardous locations/environmental protection, 100.0 milliamperes inductive load and 1.0 amperes resistive load dc at sea level contact load current rating, 3 individual section quantity, +0.500 to 2.500 inch-pounds single actuator detent rotational torque range, 350.0 milliamperes resistive load ac at sea level contact load current rating.

NSN 5930-01-331-8701 Datasheet

(NSN) National Stock Number

5930-01-331-8701

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-331-8701

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sat, Dec 29, 1990

Schedule B Code

8536509020

Contact Load Current Rating

100.0 milliamperes inductive load and 1.0 amperes resistive load dc at sea level

Contact Load Current Rating

350.0 milliamperes resistive load ac at sea level

Detent Rotational Torque Range

+0.500 to 2.500 inch-pounds single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

3

Operating Temp Range

-65.0 to 125.0 celsius

Overall Diameter

1.430 inches maximum

Overall Length

2.134 inches minimum and 2.351 inches maximum

Specification/Standard Data

81349-mil-s-3786/28 government specification

Style Designator

tap, circular, bushing mount

Switch Actuator Positioning Increment

30.0 degrees single actuatorunable to decode

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Test Data Document

"81349-mil-s-3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Class

2a single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-331-8701?

   The FSCG of the NSN 5930-01-331-8701 is 5930

2. Does the NSN 5930-01-331-8701 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-331-8701 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-331-8701 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-331-8701 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-331-8701 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Sat, Dec 29, 1990