NSN M3786/35-059

A fabricated or processed item which forms a portion of a transmission line or which when added to complementary items will form a transmission line or a portion thereof. Do not use if a more specific item name now exists in the index. See also tuner, transmission line and line, radio frequency transmission.

150.0 milliamperes resistive load ac at sea level contact load current rating, contact load current rating, 200.0 milliamperes inductive load and 30.0 milliamperes inductive load and 100.0 milliamperes inductive load dc at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts, makes before breaks single section rear contact switching action.

NSN 5930-01-051-4395 Datasheet

(NSN) National Stock Number

5930-01-051-4395

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-051-4395

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Fri, Dec 2, 1977

Schedule B Code

8536509020

Contact Load Current Rating

Contact Load Current Rating

150.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

200.0 milliamperes inductive load and 30.0 milliamperes inductive load and 100.0 milliamperes inductive load dc at sea level

Contact Switching Action

makes before breaks single section rear

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.235 inches minimum and 0.265 inches maximum single actuator

Flat Height

0.088 inches minimum and 0.098 inches maximum single actuator

Individual Section Quantity

1

Mounting Method

threaded bushing with panel seal single mounting facility

Nominal Thread Size

0.250 inches single mounting facility

Nonturn Device Type

flatted bushing at 3:00 oclock

Overall Diameter

0.562 inches nominal

Overall Length

1.242 inches nominal

Pole Quantity

4 single section front

Rotor Through Connection Quantity

4 single section

Shaft Diameter

0.123 inches minimum and 0.126 inches maximum single actuator

Shaft Type

round single actuator

Shaft Length

0.605 inches minimum and 0.645 inches maximum single actuator

Style Designator

snap or line

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Test Data Document

"81349-mil-s-3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Length

0.230 inches minimum and 0.255 inches maximum single mounting facility

Thread Series Designator

unf single mounting facility

Throw Quantity

2 single section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81073

Grayhill Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-051-4395?

   The FSCG of the NSN 5930-01-051-4395 is 5930

2. Does the NSN 5930-01-051-4395 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-051-4395 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-051-4395 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-051-4395 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-051-4395 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Fri, Dec 2, 1977