NSN M39006-04-1253

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flowo s an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes:suppressor, ignition interference. See also resistor (1), fixentewire wound, inductive.

plain foil anode type, 0.312 inches maximum body diameter, w/o mtg facilities, axial terminals body style, tantalum capacitive electrode material, 1.047 inches nominal body length.

NSN 5910-00-010-8466 Datasheet

(NSN) National Stock Number

5910-00-010-8466

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-010-8466

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Wed, Dec 13, 1972

Schedule B Code

8532290040

Anode Type

plain foil

Body Diameter

0.312 inches maximum

Body Length

1.047 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitive Electrode Material

tantalum

Capacitance Value Per Section

5.500 microfarads single section

Case Insulation Material

plastic

Dc Leakage At Maximum Operating Temp

6.0 microamperes

Dc Leakage At Reference Temp

2.000 microamperes

Dissipation Factor At Reference Temp In Percent

10.0000

Electrical Polarization

nonpolarized

Features Provided

hermetically sealed case

Impedance At Minimum Operating Temp In Ohms

406.0

Mil-Std-1276 Wire Lead Type Designator

n-3

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

30.0 dc single section

Reliability Failure Rate Level In Percent

0.1000

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-39006/4 government specification

Terminal Diameter

0.025 inches nominal

Terminal Length

1.500 inches nominal

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-39006 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-20.00 to 20.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-010-8466?

   The FSCG of the NSN 5910-00-010-8466 is 5910

2. Does the NSN 5910-00-010-8466 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-010-8466 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-010-8466 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-010-8466 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-010-8466 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Wed, Dec 13, 1972