NSN M39019/04-252

A valve designed to automatically release excessive pressures. It is actuated by static pressure upstream of the valve and is used as a safety valve or relief valve, and may be set to close at a predetermined pressure. It is not designed for regulation of continuously fluctuating loads. It may be inline or cartridge (manifold) design. Excludes:valve (1), relief, pressure and temperature.

between pole one and two actuator position designation, 1 alarm auxiliary switch function and quantity, 1.531 inches minimum and 1.562 inches maximum body length, trip-reset actuator function, multipole-single actuator type body style.

NSN 5925-01-094-9652 Datasheet

(NSN) National Stock Number

5925-01-094-9652

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-094-9652

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Wed, May 21, 1980

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

between pole one and two

Auxiliary Switch Function And Quantity

1 alarm

Body Length

1.531 inches minimum and 1.562 inches maximum

Body Style

multipole-single actuator type

Body Width

1.250 inches minimum and 1.281 inches maximum

Bushing Length

0.332 inches minimum and 0.380 inches maximum

Center To Center Distance Between Terminals Parallel To Length

0.875 inches minimum and 0.906 inches maximum

Center To Center Distance Between Terminals Parallel To Width

0.594 inches minimum and 0.656 inches maximum

Circuit Protection Type

overcurrent all locations

Fragility Factor

moderately rugged

Frequency In Hertz

400.0 all locations

Inclosure Protection Type For Which Designed

fungus resistant and hermetically sealed

Internal Trip Release Configuration

series trip all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Maximum Continuous Load Current Rating Per Pole

12.5 amperes ac and 12.5 amperes dc all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

300.0 ac and 500.0 dc all locations

Mounting Facility Type And Quantity

1 threaded bushing with panel seal

Mounting Surface To Terminal End Distance

1.797 inches minimum and 1.828 inches maximum

Nominal Thread Size

0.375 inches

Operating Voltage Type And Rating Per Pole In Volts

240.0 ac and 50.0 dc all locations

Pole Quantity

2

Reset Method

manual

Special Handling Feature

magnetic

Specification/Standard Data

81349-mil-c-39019/4 government specification

Storage Type

general purpose warehouse

Switch Location And Position Designation

internal at pole two

Switch Terminal Type

tab, solder lug

Switch Voltage Rating And Type In Volts

120.0 ac and 50.0 dc

Switch Contact Arrangement

single pole, double throw

Switch Current Rating And Type In Amps

0.5 ac and 0.5 dc

Terminal Type And Quantity

4 wire hook

Test Data Document

"81349-mil-c-39019 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

32

Thread Series Designator

unef

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

0.500 minimum at 200 pct and 9.000 maximum at 200 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Unpackaged Unit Weight

100.0 grams nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-094-9652?

   The FSCG of the NSN 5925-01-094-9652 is 5925

2. Does the NSN 5925-01-094-9652 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-094-9652 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-094-9652 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5925-01-094-9652 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-094-9652 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Wed, May 21, 1980