NSN M39019-2-9

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

trip-reset actuator function, 1 alarm auxiliary switch function and quantity, single pole type body style, 1.562 inches maximum body length, at pole one actuator position designation.

NSN 5925-00-133-2811 Datasheet

(NSN) National Stock Number

5925-00-133-2811

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-133-2811

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Mon, Dec 30, 1968

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Auxiliary Switch Function And Quantity

1 alarm

Body Length

1.562 inches maximum

Body Style

single pole type

Body Width

0.625 inches maximum

Bushing Length

0.280 inches minimum and 0.380 inches maximum

Center To Center Distance Between Terminals Parallel To Length

0.906 inches maximum

Circuit Protection Type

overcurrent single location

Frequency In Hertz

400.0 single location

Inclosure Protection Type For Which Designed

fungus resistant

Internal Trip Release Configuration

series trip single location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Maximum Continuous Load Current Rating Per Pole

50.0 milliamperes ac single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

300.0 ac single location

Mounting Facility Type And Quantity

1 threaded bushing

Mounting Surface To Terminal End Distance

1.700 inches maximum

Nominal Thread Size

0.375 inches

Operating Voltage Type And Rating Per Pole In Volts

240.0 ac single location

Pole Quantity

1

Reset Method

manual

Switch Location And Position Designation

internal at pole one

Switch Terminal Type

tab, solder lug

Switch Voltage Rating And Type In Volts

120.0 ac and 50.0 dc

Switch Contact Arrangement

single pole, double throw

Switch Current Rating And Type In Amps

0.5 ac and 0.5 dc

Terminal Type And Quantity

2 wire hook

Test Data Document

"81349-mil-c-39019 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

32

Thread Series Designator

unef

Trip Release Characteristic

time delay single location

Trip Release Method

magnetic single location

Trip Delay Time In Seconds Per Rated Continuous Current

0.950 maximum at 200 pct single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 single location

Ultimate Trip Time Per Pole In Seconds

0.200 minimum and 0.700 maximum single location

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-133-2811?

   The FSCG of the NSN 5925-00-133-2811 is 5925

2. Does the NSN 5925-00-133-2811 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-133-2811 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-133-2811 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5925-00-133-2811 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-133-2811 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Mon, Dec 30, 1968