NSN M393

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

2 pin terminal type and quantity, 1.120 inches maximum overall diameter, fully inclosed inclosure type, 0.750 inches maximum overall height, unable to decode rating method.

NSN 5950-01-333-0326 Datasheet

(NSN) National Stock Number

5950-01-333-0326

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-333-0326

Requires Demilitarization

Yes

(INC) Item Name Code

00724

Date

Mon, Jan 21, 1991

Schedule B Code

8504900020

Inclosure Type

fully inclosed

Overall Diameter

1.120 inches maximum

Overall Height

0.750 inches maximum

Rating Method

unable to decode

Terminal Type And Quantity

2 pin

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000724

Cross Reference

CAGE Codes

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

09798

Payne Magnetics, Inc.

U.s./canadian manufacturers

09344

Rockwell Collins, Inc. Dba Rc Displays Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34420

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063498

Schedule B & Trade

Schedule B

8504-90-0020

Description

transformer parts

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77129

(NAICS) North American Industrial Classification System

335311

Questions & Answers

1. What is the FSCG of the NSN 5950-01-333-0326?

   The FSCG of the NSN 5950-01-333-0326 is 5950

2. Does the NSN 5950-01-333-0326 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504900020

3. Does NSN 5950-01-333-0326 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-333-0326 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-333-0326 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-333-0326 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Mon, Jan 21, 1991