NSN M55342K06B294DR

A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes:washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.

70.0 ambient temp in deg celsius at full rated power, 0.010 inches minimum and 0.040 inches maximum body height, intercom set end item identification, 0.045 inches minimum and 0.060 inches maximum body length, 150.0 ambient temp in deg celsius at zero percent rated power.

NSN 5905-01-331-5753 Datasheet

(NSN) National Stock Number

5905-01-331-5753

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

01-331-5753

Requires Demilitarization

Yes

(INC) Item Name Code

67164

Date

Fri, Dec 21, 1990

Schedule B Code

8533100042

End Item Identification

intercom set

Ambient Temp In Deg Celsius At Full Rated Power

70.0

Ambient Temp In Deg Celsius At Zero Percent Rated Power

150.0

Body Height

0.010 inches minimum and 0.040 inches maximum

Body Length

0.045 inches minimum and 0.060 inches maximum

Body Width

0.070 inches minimum and 0.100 inches maximum

Electrical Resistance

294.000 ohms

Inclosure Method

uninclosed

Power Dissipation Rating In Watts

0.100 free air

Reliability Failure Rate Level In Percent

0.010

Reliability Indicator

established

Resistance Tolerance In Percent

-1.000 to 1.000

Specification/Standard Data

81349-mil-r-55342/6 government specification

Style Designator

termination pad each end

Temp Coefficient Of Resistance In Ppm Per Deg Celsius

-100.0 to 100.0

Temp Range Of Temp Coefficient In Deg Celsius

-55.0 to 125.0

Terminal Type

terminal type per body style

Test Data Document

"81349-mil-r-55342 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0067164

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

35140

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-10-0042

Description

fixed carbon resistors, composition or film type, designed for surface mounting, having two terminals

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77231

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-01-331-5753?

   The FSCG of the NSN 5905-01-331-5753 is 5905

2. Does the NSN 5905-01-331-5753 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533100042

3. Does NSN 5905-01-331-5753 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-01-331-5753 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5905-01-331-5753 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-01-331-5753 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Fri, Dec 21, 1990