NSN M55629/5-028

An item designed to transmit manual, rotary or linear motion to other devices. May include detachable or nondetachable stud (shaft), pointer, or skirt. It may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. For items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see handwheel. For items calibrated in units or series of divisions to denote relative positioning of devices see dial, control. Excludes:doorknob; and handle (as modified).

multipole-multiple actuator type body style, 2.479 inches minimum and 2.510 inches maximum body length, 2.205 inches minimum and 2.285 inches maximum body width, trip-reset actuator function, at each pole actuator position designation.

NSN 5925-00-306-2829 Datasheet

(NSN) National Stock Number

5925-00-306-2829

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

00-306-2829

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Wed, Oct 17, 1973

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at each pole

Body Length

2.479 inches minimum and 2.510 inches maximum

Body Style

multipole-multiple actuator type

Body Width

2.205 inches minimum and 2.285 inches maximum

Boss Height

0.109 inches minimum and 0.171 inches maximum

Center To Center Distance Between Terminals Parallel To Length

1.660 inches minimum and 1.960 inches maximum

Center To Center Distance Between Terminals Parallel To Width

0.719 inches minimum and 0.781 inches maximum

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.719 inches minimum and 0.781 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.046 inches minimum and 2.078 inches maximum

External Actuator Linkage Arrangement

one, two, and three linked

Fragility Factor

moderately rugged

Frequency In Hertz

400.0 all locations

Inclosure Protection Type For Which Designed

fungus resistant

Internal Trip Release Configuration

series trip all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

3 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

2.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac all locations

Mounting Facility Type And Quantity

6 threaded hole(s)

Mounting Surface To Terminal End Distance

2.522 inches minimum and 2.553 inches maximum

Nominal Thread Size

0.138 inches

Operating Voltage Type And Rating Per Pole In Volts

240.0 ac all locations

Pole Quantity

3

Reset Method

manual

Specification/Standard Data

81349-mil-c-55629/5 government specification

Storage Type

general purpose warehouse

Terminal Type And Quantity

6 threaded stud

Test Data Document

"81349-mil-c-55629 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Trip Delay Time In Seconds Per Rated Continuous Current

9.500 minimum at 200 pct and 150.000 maximum at 200 pct all locations

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

150.0 all locations

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

81541

Sensata Technologies Maryland, Inc

Non-manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-00-306-2829?

   The FSCG of the NSN 5925-00-306-2829 is 5925

2. Does the NSN 5925-00-306-2829 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-00-306-2829 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-00-306-2829 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-00-306-2829 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-00-306-2829 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Wed, Oct 17, 1973