NSN M7175

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

unable to decode input-output phase relationship, 0.480 inches nominal body length, next assy 4240359 used on alq-99 end item identification, 0.770 inches nominal body outside diameter, fully inclosed inclosure type.

NSN 5950-01-498-4795 Datasheet

(NSN) National Stock Number

5950-01-498-4795

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-498-4795

Requires Demilitarization

Yes

(INC) Item Name Code

00738

Date

Thu, Jun 27, 2002

End Item Identification

next assy 4240359 used on alq-99

Body Length

0.480 inches nominal

Body Outside Diameter

0.770 inches nominal

Inclosure Type

fully inclosed

Input-Output Phase Relationship

unable to decode

Maximum Operating Temp

125.0 celsius

Overall Length

0.730 inches nominal

Reliability Indicator

not established

Special Features

dc resistance: terminal 1 to 2, min .0052, max .0070 ohms; terminal 3 to 4, min .686, max 1.03 ohms; all terminals 22 awg, 1 to 2 terminal 3 turns, 3 to 4 87 turns

Terminal Type And Quantity

4 pin

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000738

Cross Reference

CAGE Codes

93346

Caes Systems Llc

U.s./canadian manufacturers

31669

Pico Electronics Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-498-4795?

   The FSCG of the NSN 5950-01-498-4795 is 5950

2. Does NSN 5950-01-498-4795 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5950-01-498-4795 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5950-01-498-4795 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5950-01-498-4795 was assigned to the Federal Catalog?

   It was assigned 24 years ago, on Thu, Jun 27, 2002