NSN M7467567-2REV1

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

breaks before makes single section front contact switching action, 1 individual section quantity, 4 single section front pole quantity, threaded bushing single mounting facility mounting method, 0.375 inches single mounting facility nominal thread size.

NSN 5930-00-252-8990 Datasheet

(NSN) National Stock Number

5930-00-252-8990

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-252-8990

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Contact Switching Action

breaks before makes single section front

Individual Section Quantity

1

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Pole Quantity

4 single section front

Shaft Diameter

0.250 inches nominal single actuator

Shaft Type

round single actuator

Shaft Length

0.812 inches nominal single actuator

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

2 single section front

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

24446

General Electric Company

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5930-00-252-8990?

   The FSCG of the NSN 5930-00-252-8990 is 5930

2. Does NSN 5930-00-252-8990 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5930-00-252-8990 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5930-00-252-8990 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5930-00-252-8990 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963