NSN M81309-B2CO2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.0002 inches maximum film thickness, 3 type and 2 class and co2 grade nondefinitive spec/std data, soft film hardness designation, aerosol can features provided, cold application type.

NSN 8030-01-603-2129 Datasheet

(NSN) National Stock Number

8030-01-603-2129

(FSG) Federal Supply Group

80 - Brushes, Paints, Sealers, and Adhesives

(FSC) Federal Supply Classification

8030 - Preservative and Sealing Compounds

(NIIN) National Item Identification Number

01-603-2129

Requires Demilitarization

Yes

(INC) Item Name Code

16687

Date

Thu, Feb 23, 2012

Application Type

cold

Features Provided

aerosol can

Film Hardness Designation

soft

Film Thickness

0.0002 inches maximum

Nondefinitive Spec/Std Data

3 type and 2 class and co2 grade

Special Features

water displacing; soft film; avionic grade

Supplementary Features

twelve 16 ounce aerosol cans

Usage Design

for protection of metal surfaces in indoor environments and for short term outdoor protection

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

Y - Indicates information is in the hazardous materials information resource system (hmirs).

Hazardous Characteristics Code

V3 - Aerosol, flammable

Pseudo Item Name Code

0016687

Cross Reference

CAGE Codes

1KQX9

Andpak, Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

80244

General Services Administration Federal Supply Service

U.s./canadian manufacturers

Freight Information

Air Commodity

CD -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

O - Flammable compressed gas, un class 2.1 (flammable gas label)

Uniform Freight Classification Item Number

55330

Water Commodity

635 - Chemicals, other than drugs or sundries

National Motor Freight Classification Item Number

050234

Questions & Answers

1. What is the FSCG of the NSN 8030-01-603-2129?

   The FSCG of the NSN 8030-01-603-2129 is 8030

2. Does NSN 8030-01-603-2129 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 8030-01-603-2129 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 8030-01-603-2129 contain hazardous materials?

   Indicates information is in the hazardous materials information resource system (hmirs).

5. When the NSN 8030-01-603-2129 was assigned to the Federal Catalog?

   It was assigned 14 years ago, on Thu, Feb 23, 2012