NSN M96AA

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1.235 inches nominal height, headset type body style, 80063 connector manufacturer code, 5.0 ohms nominal impedance rating, +200.0 to 6000.0 frequency response range in hertz.

NSN 5965-00-755-4643 Datasheet

(NSN) National Stock Number

5965-00-755-4643

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5965 - Microphones and Speakers Handsets Headsets

(NIIN) National Item Identification Number

00-755-4643

Requires Demilitarization

Yes

(INC) Item Name Code

00362

Date

Fri, Jan 1, 1960

Schedule B Code

8518903000

Body Style

headset type

Connector Manufacturer Code

80063

Frequency Response Range In Hertz

+200.0 to 6000.0

Height

1.235 inches nominal

Impedance Rating

5.0 ohms nominal

Output Sensitivity Rating In Decibels

-74.0

Output Sensitivity Rating Reference

0.0002 dynes per sq centimeter

Polarity Connection

not required

Sound Pickup Directional Type

unidirectional

Special Features

does not includeboom or cable assy

Test Data Document

"81349-mil-prf-26542/2 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Width

1.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000362

Cross Reference

CAGE Codes

04655

General Dynamics Mission Systems, Inc.

Non-manufacturers

18068

Astrocom Electronics Inc

U.s./canadian manufacturers

82872

Roanwell, Llc

U.s./canadian manufacturers

D0800

Elno Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

81134

Bosch Security Systems, Inc Dba Use Cage Code 25734 for Cataloging Div Communications Division

Non-manufacturers

59369

Acousticom Corp Dba Acousticom

U.s./canadian manufacturers

80058

Joint Electronics Type Designation System

Military standards and standards organizations (ex:stanags,milspecs,defstans)

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

D2295

Astro-Technik Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

87660

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

178580

Schedule B & Trade

Schedule B

8518-90-3000

Description

microphone parts, loudspeaker parts, amplifier parts & headphone parts

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76492

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5965-00-755-4643?

   The FSCG of the NSN 5965-00-755-4643 is 5965

2. Does the NSN 5965-00-755-4643 have a Schedule B code assigned?

   Yes, the Schedule B code is 8518903000

3. Does NSN 5965-00-755-4643 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5965-00-755-4643 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5965-00-755-4643 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5965-00-755-4643 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960