NSN ME-60

A valve having two or more ports with valve stem or pilot needle in a normally open or closed position. It is specifically designed to stop or start or change the flow of fluid by means of the magnetic action of an electric coil on a moveable core or plunger. The valve may be equipped with a manual opening or closing device. For items with three or more ports that utilize a reciprocating slide with recess areas which mate with ports in an integral or replaceable ported sleeve, see valve (1), linear, directional control. It may be inline or cartridge (manifold) design. Excludes:valve (1), butterfly.

4.125 inches nominal center to center distance between bolt holes along width, 8 bolt hole quantity, 6.158 inches minimum and 6.342 inches maximum aperture width, 8.408 inches minimum and 8.592 inches maximum aperture length, 4.000 inches nominal center to center distance between bolt holes along length.

NSN 5999-01-070-8434 Datasheet

(NSN) National Stock Number

5999-01-070-8434

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5999 - Miscellaneous Electrical and Electronic Components

(NIIN) National Item Identification Number

01-070-8434

Requires Demilitarization

Yes

(INC) Item Name Code

20281

Date

Sat, Jan 20, 1979

Schedule B Code

8543909000

Aperture Length

8.408 inches minimum and 8.592 inches maximum

Aperture Width

6.158 inches minimum and 6.342 inches maximum

Bolt Hole Quantity

8

Center To Center Distance Between Bolt Holes Along Length

4.000 inches nominal

Center To Center Distance Between Bolt Holes Along Width

4.125 inches nominal

Cross-Sectional Height

0.110 inches minimum and 0.140 inches maximum

Cross-Sectional Shape Style

mesh and composition

Environmental Protection Material Location

around rf shielding gasket outer perimeter

Hole Diameter

0.060 inches nominal

Material Document And Classification

unable to decode

Material

unable to decode

Minor Height

0.110 inches minimum and 0.140 inches maximum

Minor Width

0.110 inches minimum and 0.140 inches maximum

Outside Corner Bevel Length Along Length

0.120 inches nominal

Outside Corner Bevel Length Along Width

0.120 inches nominal

Outside Edge To Bolt Hole Center Distance Along Length

0.310 inches nominal

Outside Edge To Bolt Hole Center Distance Along Width

0.310 inches nominal

Overall Length

9.750 inches nominal

Overall Width

7.500 inches nominal

Style Designator

non-circular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020281

Cross Reference

CAGE Codes

07700

Technical Wire Products, Llc Dba Twp

U.s./canadian manufacturers

0ZBE8

Triman Industries Inc

Non-manufacturers

81361

Edgewood Chemical Biological Center Ecbc

U.s./canadian manufacturers

12881

Metal Textiles Corporation Dba Metal Textiles Div Electronic Shielding Group

U.s./canadian manufacturers

18565

Parker-Hannifin Corporation Dba Pneutronics Div Chomerics Division

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35070

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

062800

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5999-01-070-8434?

   The FSCG of the NSN 5999-01-070-8434 is 5999

2. Does the NSN 5999-01-070-8434 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5999-01-070-8434 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5999-01-070-8434 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5999-01-070-8434 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5999-01-070-8434 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Sat, Jan 20, 1979