NSN MEG175

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2350506275147 end item identification, limiter w/hole body style, time delay circuit over-current interruption type, 2.00 inches nominal center to center distance between mounting facilities parallel to length, 120.0 135 pct of current rating and 1800.0 135 pct of current rating circuit over-current interruption delay time in seconds.

NSN 5920-01-677-5620 Datasheet

(NSN) National Stock Number

5920-01-677-5620

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

01-677-5620

Requires Demilitarization

Yes

(INC) Item Name Code

00249

Date

Wed, Dec 19, 2018

Schedule B Code

8536100040

End Item Identification

2350506275147

Body Style

limiter w/hole

Center To Center Distance Between Mounting Facilities Parallel To Length

2.00 inches nominal

Circuit Over-Current Interruption Delay Time In Seconds

120.0 135 pct of current rating and 1800.0 135 pct of current rating

Circuit Over-Current Interruption Type

time delay

Continuous Current Rating In Amps

175.0

Features Provided

rohs directive compliance

Interruption Indicator Method

no visual indication

Material

copper location not otherwise specified

Material

copper terminal

Part Name Assigned By Controlling Agency

mega bolt on fuse

Maximum Voltage Rating In Volts

32.0 dc

Mounting Hole Diameter

0.47 inches nominal

Overall Height

0.39 inches nominal

Overall Length

2.70 inches nominal

Overall Width

0.75 inches nominal

Terminal Length

0.775 inches nominal

Terminal Thickness

0.04 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000249

Cross Reference

CAGE Codes

75915

Littelfuse, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34740

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

062060

Schedule B & Trade

Schedule B

8536-10-0040

Description

fuses, except glass cartridge, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77251

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5920-01-677-5620?

   The FSCG of the NSN 5920-01-677-5620 is 5920

2. Does the NSN 5920-01-677-5620 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536100040

3. Does NSN 5920-01-677-5620 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5920-01-677-5620 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5920-01-677-5620 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5920-01-677-5620 was assigned to the Federal Catalog?

   It was assigned 7 years ago, on Wed, Dec 19, 2018