NSN MICRO LSX

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

functional description lightning protector, dc blocked; ultra compact footprint incorporates a fully integrated connector housing that is completely weatherized and available in various connector configurations; maintenancefree and recommended for transmitters and receivers supplementary features, 2.490 inches nominal overall length, frequency range 4200-6000 mhz; mounting bulkhead; protected side connector n female; surge side connector n female; unit impedance 50; bellcore ta-nwt-000487 120 mph wind driven rain; industry's lowest throughput energy; multi-strike capability; surge 20ka iec 1000-4-5 8/20 us waveform; vswr 1.2 to1 typical; insertion loss 0.1db typical; frequency range 4.2 to 6.0 ghz; power 10w continuous; operational temp range m40.0 to p85.0 deg c; vibration 1gat 5hz to 100 hz special features, outdoor usage design.

NSN 5920-01-488-8425 Datasheet

(NSN) National Stock Number

5920-01-488-8425

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

01-488-8425

Requires Demilitarization

Yes

(INC) Item Name Code

00382

Date

Wed, Sep 5, 2001

Schedule B Code

8535400000

Overall Length

2.490 inches nominal

Special Features

frequency range 4200-6000 mhz; mounting bulkhead; protected side connector n female; surge side connector n female; unit impedance 50; bellcore ta-nwt-000487 120 mph wind driven rain; industry's lowest throughput energy; multi-strike capability; surge 20ka iec 1000-4-5 8/20 us waveform; vswr 1.2 to1 typical; insertion loss 0.1db typical; frequency range 4.2 to 6.0 ghz; power 10w continuous; operational temp range m40.0 to p85.0 deg c; vibration 1gat 5hz to 100 hz

Supplementary Features

functional description lightning protector, dc blocked; ultra compact footprint incorporates a fully integrated connector housing that is completely weatherized and available in various connector configurations; maintenancefree and recommended for transmitters and receivers

Usage Design

outdoor

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000382

Cross Reference

CAGE Codes

30992

Infinite Electronics International, Inc

U.s./canadian manufacturers

61114

Polyphaser Corporation

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8535-40-0000

Description

lightning arrestors, voltage limiters and surge suppressors, for voltage exceeding 1000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77245

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5920-01-488-8425?

   The FSCG of the NSN 5920-01-488-8425 is 5920

2. Does the NSN 5920-01-488-8425 have a Schedule B code assigned?

   Yes, the Schedule B code is 8535400000

3. Does NSN 5920-01-488-8425 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5920-01-488-8425 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5920-01-488-8425 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5920-01-488-8425 was assigned to the Federal Catalog?

   It was assigned 25 years ago, on Wed, Sep 5, 2001