NSN MIL-S-8805/53

0.115 inches minimum and 0.135 inches maximum actuator roller width, roller arm actuator style, hole mounted body style, 0.490 inches minimum and 0.510 inches maximum actuator roller diameter, 1.553 inches minimum and 1.573 inches maximum center to center distance between housing mounting facilities parallel to height.

NSN 5930-00-916-7975 Datasheet

(NSN) National Stock Number

5930-00-916-7975

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-916-7975

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Wed, Jul 13, 1966

Schedule B Code

8536509050

Actuator Roller Diameter

0.490 inches minimum and 0.510 inches maximum

Actuator Roller Width

0.115 inches minimum and 0.135 inches maximum

Actuator Style

roller arm

Body Style

hole mounted

Center To Center Distance Between Housing Mounting Facilities Parallel To Height

1.553 inches minimum and 1.573 inches maximum

Center To Center Distance Between Housing Mounting Facilities Parallel To Length

1.865 inches minimum and 1.885 inches maximum

Contact Load Current Rating At Maximum Rated Voltage

15.000 amperes resistive dc and 10.000 amperes inductive dc and 5.000 amperes lamp dc and 10.000 amperes resistive ac and 10.000 amperes inductive ac and 6.000 amperes lamp ac

Hazardous Locations/Environmental Protection

watertight

Housing Length

2.498 inches minimum and 2.502 inches maximum

Housing Width

0.611 inches minimum and 0.632 inches maximum

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Mounting Method

unthreaded hole(s)

Nonpile-Up Contact Arrangement

unable to decode

Specification/Standard Data

81349-mils8805/53 government specification

Switch Actuating Force

88.0 ounces minimum and 152.0 ounces maximum

Terminal Type And Quantity

8 screw

Test Data Document

"81349-mils8805 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

76301

The Boeing Company Div Defense

U.s./canadian manufacturers

81640

Safran Power Usa, Llc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-916-7975?

   The FSCG of the NSN 5930-00-916-7975 is 5930

2. Does the NSN 5930-00-916-7975 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-00-916-7975 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-916-7975 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-916-7975 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-916-7975 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Wed, Jul 13, 1966