1. Home /
  2. FSC NSN Catalog /
  3. Electrical and Electronic Properties Measuring and Testing Instruments /
  4. MILP6324

NSN MILP6324

Pulse Generator

A preformed item of various shapes, and contours, which may have a sandwich or honeycomb core bonded to a metallic or nonmetallic facing material. It is used to enclose integral portions of the fuselage or to form partitions or sections within a wing, empennage, fuselage, nacelle or crew compartment. It may have mounting provisions such as predrilled holes to facilitate installation, but will have no items attached to it except bracket (s) or other securing devices to accommodate its own mounting or support. It may be mounted by means of fasteners, bonding or welding. Excludes:panel, interior lining, aircraft; cover access; cover, access, aircraft; floor (1), aircraft; core material, cellular, structural.

hours average life measurement, 275.0 watts output average power rating per channel, pulse repetition calibration function, rectangular or square basic shape style, -10.0 to 10.0 calibrated tolerance in percent.

NSN 6625-00-643-5969 Datasheet

(NSN) National Stock Number
6625-00-643-5969
(NIIN) National Item Identification Number
00-643-5969
Requires Demilitarization
Yes
(INC) Item Name Code
00411
Date
Tue, Jan 1, 1963
Schedule B Code
8543200000
Average Life Measurement
hours
Average Power Rating Per Channel
275.0 watts output
Basic Shape Style
rectangular or square
Calibrated Tolerance In Percent
-10.0 to 10.0
Calibration Function
pulse repetition
Circuit Construction Type
electron tube
Connection Contact Type And Quantity
3 receptacle, coaxial internal and 1 receptacle, power external
Connection Type
pin front
Control Type
local
Environmental Protection
general purpose
External Ac Operating Voltage In Volts
115.0 nominal single voltage
Impedance Rating Per Channel
2.500 kilohms output channel
Impedance Rating Per Channel
50.000 ohms output channel
Inclosure Type
encased
Indicator Device Type And Quantity
1 light
Installation Design
portable
Phase
single
Maximum Operating Altitude Rating
6000.0 feet
Operating Ac Frequency In Hertz
1000.0 maximum single voltage
Operating Ac Frequency In Hertz
50.0 minimum single voltage
Operating Control Method
manual
Operating Temp Range
-40.0 to 55.0 celsius
Output Wave Shape
sawtooth
Overall Height
15.750 inches nominal
Overall Length
23.000 inches nominal
Overall Width
19.750 inches nominal
Polarity Per Channel
positive output channel
Polarity Per Channel
negative output channel
Pulse Decay Time Per Channel
100.000 nanoseconds minimum output channel
Pulse Decay Time Per Channel
300.000 nanoseconds maximum output channel
Pulse Duration Per Channel
1.500 microseconds nominal output channel
Pulse Peak Amplitude Per Channel
50.000 volts output channel
Pulse Repetition Rate Per Channel
10.000 kilopulses per second maximum operating channel
Pulse Repetition Rate Per Channel
50.000 pulses per second minimum operating channel
Pulse Rise Time Per Channel
250.000 nanoseconds maximum output channel
Pulse Rise Time Per Channel
50.000 nanoseconds minimum output channel
Signal Data Type Per Channel
output channel pulse
Signal Voltage Rating Per Channel
100.000 volts nominal output

Identification

Demilitarization Code
Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Source of Supply Code
XZZ -
Pseudo Item Name Code
0000411

Cross Reference

CAGE Codes

80058
Joint Electronics Type Designation System
Military standards and standards organizations (ex:stanags,milspecs,defstans)
81349
Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity
HQ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
W - Rating variable
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
3 - Electrostatic sensitive device (esd)
Uniform Freight Classification Item Number
34580
Water Commodity
738 - Computing equipment, computer components, and circuit cards
National Motor Freight Classification Item Number
061700

Schedule B & Trade

Schedule B
8543-20-0000
Description
signal generators
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77878
(NAICS) North American Industrial Classification System
334515

Questions & Answers

  1. What is the FSCG of the NSN 6625-00-643-5969?

    The FSCG of the NSN 6625-00-643-5969 is 6625

  2. Does the NSN 6625-00-643-5969 have a Schedule B code assigned?

    Yes, the Schedule B code is 8543200000

  3. Does NSN 6625-00-643-5969 require demilitarization?

    "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

  4. Does NSN 6625-00-643-5969 contain precious materials?

    Item does not contain precious metal.

  5. Does NSN 6625-00-643-5969 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 6625-00-643-5969 was assigned to the Federal Catalog?

    It was assigned 63 years ago, on Tue, Jan 1, 1963

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Recent Updates

Last Update: 1 day ago
View History