1. Home /
  2. FSC NSN Catalog /
  3. Capacitors /
  4. ML202A180KXP

NSN ML202A180KXP

Electrolytic Fixed Capacitor

An item of unique shapes and cross-sectional configurations specifically designed with dimensional tolerances and finishes. It may be metallic and/or nonmetallic and must be able to mate with or join to like items with aircraft application. The item may consist of more then one (1) piece to form an assembly. Do not use if a more specific item name exists. Excludes:bracket (1), structural component, aircraft.

0.312 inches maximum body diameter, w/o mtg facilities, axial terminals body style, 1.047 inches nominal body length, 18.000 microfarads single section capacitance value per section, etched foil anode type.

NSN 5910-00-009-6737 Datasheet

(NSN) National Stock Number
5910-00-009-6737
(FSC) Federal Supply Classification
5910 - Capacitors
(NIIN) National Item Identification Number
00-009-6737
Requires Demilitarization
Yes
(INC) Item Name Code
00008
Date
Fri, Aug 4, 1972
Schedule B Code
8532290040
Anode Type
etched foil
Body Diameter
0.312 inches maximum
Body Length
1.047 inches nominal
Body Style
w/o mtg facilities, axial terminals
Capacitance Value Per Section
18.000 microfarads single section
Capacitive Electrode Material
tantalum
Case Insulation Material
plastic
Dc Leakage At Maximum Operating Temp
13.0 microamperes
Dc Leakage At Reference Temp
2.000 microamperes
Dissipation Factor At Reference Temp In Percent
20.0000
Electrical Polarization
polarized
Features Provided
hermetically sealed case
Impedance At Minimum Operating Temp In Ohms
180.0
Mil-Std-1276 Wire Lead Type Designator
n-3
Nonderated Operating Temp
-55.0 celsius minimum and 85.0 celsius maximum
Nonderated Continuous Voltage Rating And Type Per Section
50.0 dc single section
Reliability Failure Rate Level In Percent
0.0100
Reliability Indicator
established
Schematic Diagram Designator
no common or grounded electrode(s)
Specification/Standard Data
81349-mil-c-39006/1 government specification
Terminal Diameter
0.025 inches nominal
Terminal Length
1.500 inches nominal
Terminal Type And Quantity
2 uninsulated wire lead
Test Data Document
"81349-mil-c-39006 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
Tolerance Range Per Section
-15.00 to 50.00 percent single section

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0000008

Cross Reference

CAGE Codes

18876
Us Army Aviation and Missile Command
Government departments or units, including military organizations
A486G
Nimikkeistokeskus Ncb Finland
Government departments or units, including military organizations
56289
Sprague Electric Co World Hqs
U.s./canadian manufacturers
56699
Bc Components
U.s./canadian manufacturers
94756
The Boeing Company Div Legacy Boeing Hb1
U.s./canadian manufacturers
89954
Bae Systems Controls Inc.
U.s./canadian manufacturers
73030
Hamilton Sundstrand Corporation Dba Collins Aerospace
U.s./canadian manufacturers
81349
Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)
00853
Cornell-Dubilier Marketing Inc
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
P - 77.5
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34450
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
National Motor Freight Classification Item Number
061400

Schedule B & Trade

Schedule B
8532-29-0040
Description
fixed capacitors, nesoi
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77867
(NAICS) North American Industrial Classification System
334416

Questions & Answers

  1. What is the FSCG of the NSN 5910-00-009-6737?

    The FSCG of the NSN 5910-00-009-6737 is 5910

  2. Does the NSN 5910-00-009-6737 have a Schedule B code assigned?

    Yes, the Schedule B code is 8532290040

  3. Does NSN 5910-00-009-6737 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5910-00-009-6737 contain precious materials?

    Item does not contain precious metal.

  5. Does NSN 5910-00-009-6737 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5910-00-009-6737 was assigned to the Federal Catalog?

    It was assigned 54 years ago, on Fri, Aug 4, 1972

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.

Recent Updates

Last Update: 1 day ago
View History