NSN MPC-121

A washer, round in shape, having a centrally located hole. One bearing surface is flat, the other surface is in the form of a raised shoulder (boss) having a flat bearing surface. Either or both of the bearing surfaces must be broken by a counterbore, countersink, or similar shaped recess. The thickness of the shoulder (boss) must not exceed 25 percent of the shoulder (boss) diameter. For items having a shoulder (boss) of greater thickness, use bearing, sleeve; bushing, sleeve; or spacer, sleeve. Excludes:insulator, washer and thrust type washers.

0.115 inches nominal actuator diameter, 0.410 inches nominal actuator height, up position maintained and down position maintained and center position maintained actuator position-action relationship, 4920010297636 e/i 77751 end item identification, natural single actuator actuator color.

NSN 5930-01-114-0690 Datasheet

(NSN) National Stock Number

5930-01-114-0690

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-114-0690

Requires Demilitarization

Yes

(INC) Item Name Code

00184

Date

Tue, Jun 9, 1981

Schedule B Code

8536509065

End Item Identification

4920010297636 e/i 77751

Actuator Height

0.410 inches nominal

Actuator Color

natural single actuator

Actuator Diameter

0.115 inches nominal

Actuator Position-Action Relationship

up position maintained and down position maintained and center position maintained

Actuator Style

round

Body Height

0.430 inches maximum

Body Length

0.510 inches maximum

Body Style

bushing mount

Body Width

0.575 inches maximum

Bushing Length

0.300 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

5.000 amperes resistive dc and 2.000 amperes inductive dc and 1.000 amperes lamp dc and 5.000 amperes resistive ac and 2.000 amperes inductive ac and 1.000 amperes lamp ac

Features Provided

actuator seal

Hazardous Locations/Environmental Protection

weatherproof

Inclosure Type

fully inclosed

Material

plastic case

Maximum Voltage Rating In Volts

125.0 ac and 28.0 dc

Mounting Method

threaded bushing

Mounting Surface To Terminal End Distance

0.685 inches maximum

Nominal Thread Size

0.250 inches

Nonpile-Up Contact Arrangement

1 pole, double throw, three positions maintained single switch unit

Overall Height

1.395 inches nominal

Overall Length

0.510 inches maximum

Overall Width

0.400 inches nominal

Precious Material And Location

terminal surfaces gold and contacts silver

Specification/Standard Data

81349-mil-s-83731/9 government specification

Terminal Type And Quantity

3 printed circuit

Test Data Document

"81349-mil-s-83731 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

40

Thread Series Designator

uns

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000184

Cross Reference

CAGE Codes

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

81640

Safran Power Usa, Llc

U.s./canadian manufacturers

95146

Alco Electronic Products Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-114-0690?

   The FSCG of the NSN 5930-01-114-0690 is 5930

2. Does the NSN 5930-01-114-0690 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-114-0690 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-114-0690 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5930-01-114-0690 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-114-0690 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Tue, Jun 9, 1981