NSN MPF254M2

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.395 inches minimum and 0.415 inches maximum body diameter, plastic case insulation material, 0.781 inches minimum and 0.843 inches maximum body length, w/o mtg facilities, axial terminals body style, 0.250 microfarads single section capacitance value per section.

NSN 5910-00-578-8526 Datasheet

(NSN) National Stock Number

5910-00-578-8526

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-578-8526

Requires Demilitarization

Yes

(INC) Item Name Code

31959

Date

Tue, Jan 1, 1963

Schedule B Code

8532290040

Body Diameter

0.395 inches minimum and 0.415 inches maximum

Body Length

0.781 inches minimum and 0.843 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.250 microfarads single section

Case Insulation Material

plastic

Dissipation Factor At Reference Temp In Percent

1.000

Features Provided

hermetically sealed case

Insulation Resistance At Maximum Operating Temp

10.0 megohm-microfarads

Insulation Resistance At Reference Temp

50000.0 megohm-microfarads

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

200.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.032 inches nominal

Terminal Length

1.625 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-20.00 to 20.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0031959

Cross Reference

CAGE Codes

11871

Recon/optical, Inc.

U.s./canadian manufacturers

01884

Exxelia Usa, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-578-8526?

   The FSCG of the NSN 5910-00-578-8526 is 5910

2. Does the NSN 5910-00-578-8526 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-578-8526 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-578-8526 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-578-8526 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-578-8526 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963