NSN MPL-502-0.2

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.20 actuation point nominal inches of water contact stimulus rating, actuation point adjustable, preset contact adjustability, increase contact action stimulus, unable to decode contact load current rating, -20.00 to 20.00 actuation point inches of water contact adjustment range.

NSN 5930-01-252-6094 Datasheet

(NSN) National Stock Number

5930-01-252-6094

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-252-6094

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Sun, Apr 5, 1987

Schedule B Code

8536509065

Contact Action Stimulus

increase

Contact Adjustability

actuation point adjustable, preset

Contact Adjustment Range

-20.00 to 20.00 actuation point inches of water

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

0.20 actuation point nominal inches of water

Contact Voltage Rating In Volts

unable to decode

Frequency In Hertz

unable to decode

Nonpile-Up Contact Arrangement

1 pole, single throw, normally open, momentary action

Operating Temp Rating

120.0 celsius nominal

Overall Length

1.000 inches nominal

Overall Width

1.000 inches nominal

Pressure Switch Type

differential

Terminal Type

quick disconnect, female and quick disconnect, male

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

K0662

Leonardo Mw Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

U3755

Marconi Avionics Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

U6682

Leonardo Uk Ltd

Non-manufacturers

56756

Micro Pneumatic Logic Inc

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-252-6094?

   The FSCG of the NSN 5930-01-252-6094 is 5930

2. Does the NSN 5930-01-252-6094 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-252-6094 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-252-6094 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-252-6094 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-252-6094 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Sun, Apr 5, 1987