NSN MRTBL-3

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

0.953 inches nominal overall height, aluminum alloy material, qq-a-200/9 fed spec single material response material document and classification, black color, unthreaded hole mounting provision.

NSN 5975-01-090-1062 Datasheet

(NSN) National Stock Number

5975-01-090-1062

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-090-1062

Requires Demilitarization

Yes

(INC) Item Name Code

32039

Date

Wed, Feb 13, 1980

Schedule B Code

8543909000

Color

black

Material Document And Classification

qq-a-200/9 fed spec single material response

Material

aluminum alloy

Mounting Provision

unthreaded hole

Overall Height

0.953 inches nominal

Overall Width

2.561 inches nominal

Panel Space Height

0.715 inches nominal

Style Designator

rail type

Surface Treatment Document And Classification

mil-a-8625,type ii,class 2 mil spec single treatment response

Surface Treatment

anodize

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0032039

Cross Reference

CAGE Codes

03743

Egs Electrical Group Appleton Div

U.s./canadian manufacturers

00779

Te Connectivity Corporation

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

14283

Amphenol Optimize Manufacturing Co. Div Amphenol Aerospace/matrix

U.s./canadian manufacturers

58982

Amphenol Pcd Inc Dba Amphenol Pcd Inc Div Amphenol Pcd

U.s./canadian manufacturers

33483

T J Electronics Div of Transtechnology Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-01-090-1062?

   The FSCG of the NSN 5975-01-090-1062 is 5975

2. Does the NSN 5975-01-090-1062 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-01-090-1062 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-01-090-1062 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5975-01-090-1062 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-01-090-1062 was assigned to the Federal Catalog?

   It was assigned 46 years ago, on Wed, Feb 13, 1980