NSN MS-35265-53

An item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. It may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. It is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. It may include tuning devices, integral resistors and capacitors; however, excludes:filter (as modified). The coil has only two electrical terminals. For items having tapped winding or more than one winding - see transformer, radio frequency. For coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic.

fillister head style, round head hole configuration style, 2.000 inches nominal fastener length, 0.106 inches minimum and 0.113 inches maximum head height, 0.250 inches minimum and 0.270 inches maximum head diameter.

NSN 5305-00-725-7203 Datasheet

(NSN) National Stock Number

5305-00-725-7203

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

00-725-7203

Requires Demilitarization

Yes

(INC) Item Name Code

06657

Date

Tue, Jan 1, 1963

Schedule B Code

7318152000

Fastener Length

2.000 inches nominal

Head Height

0.106 inches minimum and 0.113 inches maximum

Head Diameter

0.250 inches minimum and 0.270 inches maximum

Head Hole Configuration Style

round

Head Style

fillister

Hole Diameter

0.046 inches nominal

Hole Quantity

1

Internal Drive Style

slot

Minimum Tensile Strength

55000 pounds per square inch

Nominal Thread Diameter

0.164 inches

Screw Material Document And Classification

qq-s-633 fed spec single material response

Screw Material

steel

Screw Surface Treatment Document And Classification

qq-p-416,ty2 cl3 fed spec single treatment response

Screw Surface Treatment

cadmium and chromate

Thread Class

2a

Thread Direction

right-hand

Thread Length

1.938 inches minimum and 2.000 inches maximum

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0006657

Cross Reference

CAGE Codes

66503

Woodward, Inc. Div Fuel Systems and Controls

U.s./canadian manufacturers

A00AM

E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales

Military standards and standards organizations (ex:stanags,milspecs,defstans)

24617

General Motors Corp

U.s./canadian manufacturers

99974

Delco Electronics Corp Delco Systems Opns

U.s./canadian manufacturers

85662

Kolonis Andrew J

U.s./canadian manufacturers

81352

Air Force-Navy Aeronautical Specifications Promulgated by Aeronautical Standards Group

Military standards and standards organizations (ex:stanags,milspecs,defstans)

U0041

Prestolite Electric Limited

Non-us manufacturer (nato), other foreign organization or codification bureaus

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

72E - Engineer and material handling equipment, test/tool sets and equipment

National Motor Freight Classification Item Number

133300

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-00-725-7203?

   The FSCG of the NSN 5305-00-725-7203 is 5305

2. Does the NSN 5305-00-725-7203 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-00-725-7203 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-00-725-7203 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5305-00-725-7203 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-00-725-7203 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963