1. Home /
  2. FSC NSN Catalog /
  3. Electric Lamps /
  4. MS18237-2WT

NSN MS18237-2WT

Cartridge Lamp

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.330 inches nominal cartridge overall diameter, 15000.0 average life rating in hours, cartridge two pin polarized base style, 1.328 inches nominal cartridge overall length, long cylindrical cartridge style.

NSN 6240-01-106-0793 Datasheet

(NSN) National Stock Number
6240-01-106-0793
(FSG) Federal Supply Group
62 - Lighting Fixtures and Lamps
(FSC) Federal Supply Classification
6240 - Electric Lamps
(NIIN) National Item Identification Number
01-106-0793
Requires Demilitarization
Yes
(INC) Item Name Code
24416
Date
Sun, Jan 11, 1981
Schedule B Code
9405400000
Average Life Rating In Hours
15000.0
Base Style
cartridge two pin polarized
Cartridge Overall Diameter
0.330 inches nominal
Cartridge Overall Length
1.328 inches nominal
Cartridge Style
long cylindrical
Circuit Voltage Rating In Volts
105.000 minimum and 125.000 maximum
Filling Gas Type
neon
Lens Color
white
Lens Light Transmission Characteristic
translucent
Light Intensity Level
standard
Material
unable to decode
Primary Lamp Type
glow
Rated Average Life
hours
Resistor Rating And Location
100.000 kilohms internal

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
A - Item does not contain precious metal.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0024416

Cross Reference

CAGE Codes

96906
Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M
Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
W - Rating variable
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
55690
Water Commodity
761 - Electric lamps
National Motor Freight Classification Item Number
109700

Questions & Answers

  1. What is the FSCG of the NSN 6240-01-106-0793?

    The FSCG of the NSN 6240-01-106-0793 is 6240

  2. Does the NSN 6240-01-106-0793 have a Schedule B code assigned?

    Yes, the Schedule B code is 9405400000

  3. Does NSN 6240-01-106-0793 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 6240-01-106-0793 contain precious materials?

    Item does not contain precious metal.

  5. Does NSN 6240-01-106-0793 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 6240-01-106-0793 was assigned to the Federal Catalog?

    It was assigned 45 years ago, on Sun, Jan 11, 1981

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.