NSN MS20068-53

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

0.125 inches minimum and 0.126 inches maximum overall height, 0.490 inches minimum and 0.500 inches maximum overall length, 40.0 rockwell c minimum and 50.0 rockwell c maximum overall hardness rating, steel comp 1335 or steel comp 4130 or steel comp 5130 or steel comp 8630 overall material, 66 fed std all material responses overall material document and classification.

NSN 5315-00-990-6023 Datasheet

(NSN) National Stock Number

5315-00-990-6023

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5315 - Pins, Machine Keys and Nails

(NIIN) National Item Identification Number

00-990-6023

Requires Demilitarization

Yes

(INC) Item Name Code

02378

Date

Mon, Jan 1, 1962

Schedule B Code

8301600000

Hardness Rating

40.0 rockwell c minimum and 50.0 rockwell c maximum overall

Material Document And Classification

66 fed std all material responses overall

Material

steel comp 1335 or steel comp 4130 or steel comp 5130 or steel comp 8630 overall

Overall Height

0.125 inches minimum and 0.126 inches maximum

Overall Length

0.490 inches minimum and 0.500 inches maximum

Overall Width

0.125 inches minimum and 0.126 inches maximum

Shear Strength

90000 single pounds per square inch

Starting Edge Radius

0.062 inches nominal

Starting Edge Shape

round

Style Designator

plain

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0002378

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

72E - Engineer and material handling equipment, test/tool sets and equipment

National Motor Freight Classification Item Number

133300

Schedule B & Trade

Schedule B

8301-60-0000

Description

parts of locks, base metal

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69911

(NAICS) North American Industrial Classification System

332510

Questions & Answers

1. What is the FSCG of the NSN 5315-00-990-6023?

   The FSCG of the NSN 5315-00-990-6023 is 5315

2. Does the NSN 5315-00-990-6023 have a Schedule B code assigned?

   Yes, the Schedule B code is 8301600000

3. Does NSN 5315-00-990-6023 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5315-00-990-6023 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5315-00-990-6023 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5315-00-990-6023 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962