NSN MS21130B414

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

0.875 inches minimum and 0.891 inches maximum grip length, distance from head largest bearing surface to shank hole center, 99.0 degrees minimum and 101.0 degrees maximum countersink angle, 1.293 inches minimum and 1.313 inches maximum fastener length, 0.2487 inches minimum and 0.2492 inches maximum grip diameter.

NSN 5305-01-197-4017 Datasheet

(NSN) National Stock Number

5305-01-197-4017

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

01-197-4017

Requires Demilitarization

Yes

(INC) Item Name Code

29294

Date

Fri, Dec 21, 1984

Schedule B Code

7318152000

Countersink Angle

99.0 degrees minimum and 101.0 degrees maximum

Distance From Head Largest Bearing Surface To Shank Hole Center

Fastener Length

1.293 inches minimum and 1.313 inches maximum

Grip Diameter

0.2487 inches minimum and 0.2492 inches maximum

Grip Length

0.875 inches minimum and 0.891 inches maximum

Hardness Rating

Head Diameter

0.449 inches minimum and 0.507 inches maximum

Head Style

flat countersunk

Internal Drive Style

high-torque

Locking Feature

unable to decode

Material Document And Classification

unable to decode

Material

Material

unable to decode

Minimum Tensile Strength

63000 pounds per square inch

Nominal Thread Diameter

0.250 inches

Shank Unthreaded Hole Diameter

Surface Finish

unable to decode

Surface Treatment Document And Classification

unable to decode

Surface Treatment

unable to decode

Thread Class

3a

Thread Direction

right-hand

Thread Length

0.277 inches minimum and 0.328 inches maximum

Thread Quantity Per Inch

28

Thread Series Designator

unified national joint fine (unjf)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0029294

Cross Reference

CAGE Codes

80205

National Aerospace Standards Committee Aerospace Industries Association of America Inc Not for Rfq or Solicitation Use

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48950

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

093486

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-01-197-4017?

   The FSCG of the NSN 5305-01-197-4017 is 5305

2. Does the NSN 5305-01-197-4017 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-01-197-4017 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-01-197-4017 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5305-01-197-4017 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-01-197-4017 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Fri, Dec 21, 1984