NSN MS21252C5LS

An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes:straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.

1.813 inches minimum and 1.875 inches maximum distance from pivot pinhole center to rod connection end, 0.109 inches minimum and 0.122 inches maximum fork arm thickness, 0.531 inches nominal fork depth, 0.321 inches nominal end radius, 0.218 inches minimum and 0.228 inches maximum fork span width.

NSN 5340-00-068-0531 Datasheet

(NSN) National Stock Number

5340-00-068-0531

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-068-0531

Requires Demilitarization

Yes

(INC) Item Name Code

03796

Date

Tue, Jan 1, 1963

Schedule B Code

7318290000

Distance From Pivot Pinhole Center To Rod Connection End

1.813 inches minimum and 1.875 inches maximum

End Radius

0.321 inches nominal

Fork Arm Thickness

0.109 inches minimum and 0.122 inches maximum

Fork Depth

0.531 inches nominal

Fork Span Width

0.218 inches minimum and 0.228 inches maximum

Hole Diameter

0.250 inches minimum and 0.252 inches maximum

Material

steel overall

Nominal Thread Size

0.250 inches rod connection

Overall Width

0.447 inches minimum and 0.462 inches maximum

Shank Diameter

0.189 inches minimum and 0.195 inches maximum

Shank Length

0.610 inches minimum and 0.766 inches maximum

Style Designator

clevis

Surface Treatment Document And Classification

qq-p-416,type 2,class 3 fed spec single treatment response overall

Surface Treatment

cadmium overall

Thread Class

3a rod connection

Thread Direction

left-hand rod connection

Thread Length

0.578 inches minimum and 0.672 inches maximum rod connection

Thread Series Designator

unf rod connection

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0003796

Cross Reference

CAGE Codes

00624

Eaton Aeroquip Llc Dba Jackson North 1 Div Fluid and Electrical Distribution

U.s./canadian manufacturers

22277

Bell-Memphis Inc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

65196

Loos & Co., Inc. Div Cableware Divison

U.s./canadian manufacturers

Freight Information

Air Commodity

2Z -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49240

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094140

Schedule B & Trade

Schedule B

7318-29-0000

Description

other non-threaded articles (fasteners) of iron or steel, nesoi

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69422

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5340-00-068-0531?

   The FSCG of the NSN 5340-00-068-0531 is 5340

2. Does the NSN 5340-00-068-0531 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318290000

3. Does NSN 5340-00-068-0531 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-068-0531 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-068-0531 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-068-0531 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963