NSN MS22073-1V

A device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes:jack, leveling-support guided missile erector-launcher; jack, transportable shelter; and support, retractable, semitrailer. See also jack (as modified).

at pole one actuator position designation, 0.593 inches maximum body width, 0.780 inches maximum body length, trip-reset actuator function, single pole type body style.

NSN 5925-01-043-4336 Datasheet

(NSN) National Stock Number

5925-01-043-4336

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-043-4336

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Jun 24, 1977

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Body Length

0.780 inches maximum

Body Style

single pole type

Body Width

0.593 inches maximum

Bushing Length

0.273 inches minimum and 0.293 inches maximum

Center To Center Distance Between Terminals Parallel To Length

0.672 inches minimum and 0.734 inches maximum

Circuit Protection Type

overcurrent single location

Inclosure Protection Type For Which Designed

corrosion resistant and dustproof and explosion proof and fungus resistant and moisture resistant and sand resistant and vibration resistant

Internal Trip Release Configuration

series trip single location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 push-pull

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

1.0 amperes dc single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 dc single location

Mounting Facility Type And Quantity

1 threaded bushing

Mounting Surface To Terminal End Distance

1.812 inches maximum

Nominal Thread Size

0.469 inches

Operating Voltage Type And Rating Per Pole In Volts

28.0 dc single location

Pole Quantity

1

Reset Method

manual

Specification/Standard Data

81343-ms22073 professional/industrial association specification

Terminal Type And Quantity

2 screw

Thread Quantity Per Inch

32

Thread Series Designator

uns

Trip Release Ambient Temp Rating

25.0 celsius nominal single location

Trip Release Characteristic

time delay single location

Trip Release Method

thermal single location

Trip Delay Time In Seconds Per Rated Continuous Current

2.000 minimum at 200 pct and 20.000 maximum at 200 pct single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

145.0 single location

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

81343

Society of Automotive Engineers Inc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-043-4336?

   The FSCG of the NSN 5925-01-043-4336 is 5925

2. Does the NSN 5925-01-043-4336 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-043-4336 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-043-4336 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5925-01-043-4336 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-043-4336 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Fri, Jun 24, 1977