NSN MS24693-C207

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.990 degrees minimum and 1.010 degrees maximum countersink angle, cross recess type ii internal drive style, 0.207 inches minimum and 0.225 inches maximum head diameter, flat countersunk head style, 0.625 inches nominal fastener length.

NSN 5305-01-488-6260 Datasheet

(NSN) National Stock Number

5305-01-488-6260

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

01-488-6260

Requires Demilitarization

Yes

(INC) Item Name Code

06657

Date

Wed, Aug 29, 2001

Schedule B Code

7318152000

Countersink Angle

0.990 degrees minimum and 1.010 degrees maximum

Fastener Length

0.625 inches nominal

Head Diameter

0.207 inches minimum and 0.225 inches maximum

Head Style

flat countersunk

Internal Drive Style

cross recess type ii

Nominal Thread Diameter

0.112 inches

Screw Material Document And Classification

fed-std-66 fed std single material response

Screw Material

steel comp 302 or steel comp 303 or steel comp 304 or steel comp 305 or steel comp 316

Specification/Standard Data

96906-ms24693c207 government specification

Thread Class

2a

Thread Direction

right-hand

Thread Quantity Per Inch

48

Thread Series Designator

unf

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0006657

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

63220

Water Commodity

72E - Engineer and material handling equipment, test/tool sets and equipment

National Motor Freight Classification Item Number

133300

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-01-488-6260?

   The FSCG of the NSN 5305-01-488-6260 is 5305

2. Does the NSN 5305-01-488-6260 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-01-488-6260 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-01-488-6260 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5305-01-488-6260 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-01-488-6260 was assigned to the Federal Catalog?

   It was assigned 25 years ago, on Wed, Aug 29, 2001