NSN MS25244-P25

A bent hollow item, welded or seamless. It has a round, square or any other cross section, with a continuous periphery. It is primarily designed to convey fluids, gases and/or semisolids. Excludes:items of circular cross section which conform in dimensional characteristics to pipe, metallic; elbow, pipe; elbow, tube; bend, electrical conduit; bend, pipe, return; and bend, tube, return. For items with end fittings on one or both ends, see tube assembly, metal.

single pole type body style, 0.750 inches maximum body width, at pole one actuator position designation, trip-reset actuator function, 2.189 inches maximum body length.

NSN 5925-01-079-3085 Datasheet

(NSN) National Stock Number

5925-01-079-3085

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-079-3085

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Sun, Jul 1, 1979

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Body Length

2.189 inches maximum

Body Style

single pole type

Body Width

0.750 inches maximum

Bushing Length

0.250 inches nominal

Center To Center Distance Between Terminals Parallel To Length

0.704 inches nominal

Circuit Protection Type

overcurrent single location

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.812 inches nominal

Frequency In Hertz

400.0 single location

Inclosure Protection Type For Which Designed

explosion resistant and moisture resistant

Internal Trip Release Configuration

series trip single location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 push-pull

Maximum Continuous Load Current Rating Per Pole

25.0 amperes ac and 25.0 amperes dc single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

3500.0 ac and 6000.0 dc single location

Mounting Facility Type And Quantity

2 threaded hole(s)

Mounting Surface To Terminal End Distance

2.000 inches maximum

Nominal Thread Size

0.138 inches

Operating Voltage Type And Rating Per Pole In Volts

115.0 ac and 28.0 dc single location

Pole Quantity

1

Reset Method

manual

Terminal Type And Quantity

2 screw

Test Data Document

"81349-mil-c-5809 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Trip Release Ambient Temp Rating

25.0 celsius nominal single location

Trip Release Characteristic

time delay single location

Trip Release Method

thermal single location

Trip Delay Time In Seconds Per Rated Continuous Current

15.000 minimum at 200 pct and 55.000 maximum at 200 pct single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

138.0 single location

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

A0199

Leonardo S.p.a. - Electronics Division - Defence Business Area

Non-us manufacturer (nato), other foreign organization or codification bureaus

81343

Society of Automotive Engineers Inc

U.s./canadian manufacturers

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-079-3085?

   The FSCG of the NSN 5925-01-079-3085 is 5925

2. Does the NSN 5925-01-079-3085 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-079-3085 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-079-3085 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-079-3085 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-079-3085 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Sun, Jul 1, 1979