NSN MS25253-5

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

0.165 inches nominal actuator height, 0.110 inches nominal actuator diameter, 0.640 inches maximum actuator free position height, 0.047 pretravel inches maximum and 0.031 overtravel inches minimum and 0.020 differential inches maximum actuator movement, round actuator style.

NSN 5930-01-285-4715 Datasheet

(NSN) National Stock Number

5930-01-285-4715

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-285-4715

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Wed, Sep 14, 1988

Schedule B Code

8536509050

Actuator Height

0.165 inches nominal

Actuator Diameter

0.110 inches nominal

Actuator Free Position Height

0.640 inches maximum

Actuator Style

round

Actuator Movement

0.047 pretravel inches maximum and 0.031 overtravel inches minimum and 0.020 differential inches maximum

Body Height

0.625 inches nominal

Body Length

1.094 inches nominal

Body Width

0.415 inches maximum

Body Style

hole mounted

Center To Center Distance Between Mounting Facilities Parallel To Length

0.875 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Height

0.406 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

10.000 amperes resistive dc and 10.000 amperes inductive dc and 6.000 amperes motor dc and 10.000 amperes resistive ac and 10.000 amperes inductive ac and 3.000 amperes motor ac

Hazardous Locations/Environmental Protection

dustproof

Inclosure Type

fully inclosed

Material

plastic case

Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Mounting Method

unthreaded hole(s)

Nonpile-Up Contact Arrangement

unable to decode

Precious Material And Location

contacts silver

Specification/Standard Data

96906-ms25253 government standard

Switch Actuating Force

14.0 ounces maximum

Terminal Type And Quantity

3 tab, solder lug

Test Data Document

"81349-mil-s-8805 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.114 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-285-4715?

   The FSCG of the NSN 5930-01-285-4715 is 5930

2. Does the NSN 5930-01-285-4715 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-01-285-4715 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-285-4715 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-285-4715 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-285-4715 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Wed, Sep 14, 1988