NSN MS27217-2

0.110 inches minimum and 0.140 inches maximum actuator width, 0.110 inches minimum and 0.140 inches maximum actuator length, rectangular actuator style, 0.078 inches minimum and 0.108 inches maximum actuator free position height, 0.078 inches minimum and 0.328 inches maximum actuator height.

NSN 5930-00-435-6626 Datasheet

(NSN) National Stock Number

5930-00-435-6626

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-435-6626

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Fri, Mar 28, 1969

Schedule B Code

8536509050

Actuator Height

0.078 inches minimum and 0.328 inches maximum

Actuator Length

0.110 inches minimum and 0.140 inches maximum

Actuator Free Position Height

0.078 inches minimum and 0.108 inches maximum

Actuator Style

rectangular

Actuator Width

0.110 inches minimum and 0.140 inches maximum

Actuator Movement

0.045 pretravel inches maximum and 0.012 overtravel inches minimum and 0.015 differential inches minimum and 0.108 differential inches maximum

Body Height

0.422 inches minimum and 0.452 inches maximum

Body Length

0.766 inches minimum and 0.796 inches maximum

Body Width

0.235 inches minimum and 0.265 inches maximum

Body Style

hole mounted

Center To Center Distance Between Mounting Facilities Parallel To Length

0.495 inches minimum and 0.505 inches maximum

Contact Load Current Rating At Maximum Rated Voltage

10.000 amperes resistive dc and 5.000 amperes inductive dc and 3.000 amperes lamp dc and 5.000 amperes resistive ac and 5.000 amperes inductive ac and 1.500 amperes lamp ac

Inclosure Type

uninclosed

Maximum Voltage Rating In Volts

115.0 ac and 28.0 dc

Mounting Method

unthreaded hole(s)

Nonpile-Up Contact Arrangement

unable to decode

Overall Height

0.437 inches nominal

Overall Length

0.781 inches nominal

Switch Release Force

8.0 ounces maximum

Switch Actuating Force

8.0 ounces maximum

Terminal Type And Quantity

4 tab, solder lug

Test Data Document

"81349-mils8805-7 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Unthreaded Mounting Hole Diameter

0.087 inches minimum and 0.090 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

04426

Illinois Tool Works Inc Dba Illinois Tool Works Inc Div Illinois Tool Works

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-435-6626?

   The FSCG of the NSN 5930-00-435-6626 is 5930

2. Does the NSN 5930-00-435-6626 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-00-435-6626 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-435-6626 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-435-6626 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-435-6626 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Fri, Mar 28, 1969