NSN MS27409-2N

A preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see clip, electrical or clamp, electrical. For items which partially surround an item, see strap, retaining. For items which entirely surround an item and do not have inherent spring tension, see clamp, loop. See also clip, retaining. Do not use if a more specific item name is available.

1.140 inches nominal1.140 inches nominal actuator height, up position maintained and up position maintained and down position momentary and down position momentary and center position maintainedcenter position maintained actuator position-action relationship, roundround actuator style, 0.420 inches nominal0.420 inches nominal actuator diameter, up position locked out and up position locked out and down position no locking action and down position no locking action and center position no locking actioncenter position no locking action actuator position-locking relationship.

NSN 5930-01-253-1520 Datasheet

(NSN) National Stock Number

5930-01-253-1520

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-253-1520

Requires Demilitarization

Yes

(INC) Item Name Code

00184

Date

Sun, Apr 12, 1987

Schedule B Code

8536509065

Actuator Height

1.140 inches nominal1.140 inches nominal

Actuator Diameter

0.420 inches nominal0.420 inches nominal

Actuator Position-Action Relationship

up position maintained and up position maintained and down position momentary and down position momentary and center position maintainedcenter position maintained

Actuator Position-Locking Relationship

up position locked out and up position locked out and down position no locking action and down position no locking action and center position no locking actioncenter position no locking action

Actuator Style

roundround

Body Height

1.100 inches nominal1.100 inches nominal

Body Length

1.340 inches maximum1.340 inches maximum

Body Style

bushing mountbushing mount

Body Width

1.660 inches maximum1.660 inches maximum

Bushing Length

0.470 inches nominal0.470 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

18.000 amperes resistive dc and 10.000 amperes inductive dc and 4.000 amperes lamp dc and 11.000 amperes resistive ac and 8.000 amperes inductive ac and 2.000 amperes lamp ac

Hazardous Locations/Environmental Protection

dustproofdustproof

Inclosure Type

fully inclosedfully inclosed

Maximum Voltage Rating In Volts

115.0 ac and 115.0 ac and 28.0 dc28.0 dc

Mounting Method

threaded bushingthreaded bushing

Nominal Thread Size

0.468 inches0.468 inches

Nonpile-Up Contact Arrangement

4 pole, double throw, one position momentary, two positions maintained single switch unit

Overall Height

2.980 inches nominal2.980 inches nominal

Overall Length

1.340 inches maximum1.340 inches maximum

Overall Width

1.660 inches maximum1.660 inches maximum

Specification/Standard Data

96906-ms27409 government standard

Terminal Type And Quantity

12 screw

Test Data Document

"81349-mil-s-3950 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

3232

Thread Series Designator

uns

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000184

Cross Reference

CAGE Codes

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-253-1520?

   The FSCG of the NSN 5930-01-253-1520 is 5930

2. Does the NSN 5930-01-253-1520 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-01-253-1520 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-253-1520 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-253-1520 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-253-1520 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Sun, Apr 12, 1987